VDO SENSORS - FOR ENGINE MANAGEMENT V3.0 Manuale Utente Scaricare il pdf (Pagina 10)

PAGE

www.motec.com

RETAIL

JANUARY 2012

GPS

GPS Units

Part No. Price

GPS Units allow vehicle position, speed, and heading data to be sent to a MoTeC logging device,

which can then be used for the drawing of track maps and analysis of driving lines in the i2 analy-

sis software. GPS units can also be used for Lap Timing instead of an infrared beacon, when used

in conjunction with an CDL3, SDL, SDL3, ADL2, ADL3, or ACL.

Pro 10Hz GPS (RS232 comms only) 41303 640.00

Pro 20Hz GPS (RS232 comms only) 41304 998.00

STC Serial to CAN Converter 61125 175.00

The Professional GPS unit consists of a base unit

in a professional aluminium case with Autosport

connector, and a separate antenna. The units are

available with update rates of 10Hz or 20Hz, and

can be specified to transmit GPS data either via

RS232 or via CAN through an external MoTeC

STC part no 61125. Baud rate should be con-

firmed at time of ordering. Mating connector

not included

Professional 10Hz / 20Hz GPS

Accessories

13 Pin Autosport Professional GPS Connector (AS610-35SA) 68010 59.00

Spare GPS Antenna for Professional Unit 41305 72.00

5Hz / 10Hz GPS

5Hz GPS-G1 GPS Unit 41300 320.00

5Hz GPS GARMIN

The GPS-L5 and L10 are 5 & 10 Hz GPS units which combines the

electronics and antenna into one small unit. A highly sensitive re-

ceiver allows the GPS to lock onto signals even in difficult environ-

ments. Units come pre terminated with a DTM connector.

The L5 is pre-configured to be compatible with MoTeC 'Hundred Se-

ries' and M84 ECUs.

The L10 is pre-configured to be compatible with MoTeC Dash/Data

Loggers. It is not compatible with MoTeC ECUs

GPS-L5 5Hz GPS (ECU) 79325 195.00

GPS-L10 10Hz GPS (Data) 79324 195.00

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Nessun commento

VDO SENSORS - FOR ENGINE MANAGEMENT V3.0 Manuale Utente Pagina 10